Windows Troubleshooting
Chapter 4: Windows Peer-to-Peer Network Setup
❖
4-29
Windows NT 3.5X
Troubleshooting (DLC/
LLC Protocol)
This troubleshooting section assumes:
•
You have verified the operation of the printer using the
procedures found in Chapter 2: Connecting to Your Network.
•
You have loaded a DP PCL or PostScript print driver.
•
You have printed and retained a current copy of the
Configuration Sheet.
1
Open the Control Panel and double-click the Network icon.
2
Verify that “DLC/LLC Protocol” is loaded.
3
If this software is not present, install it using the documentation
provided by Microsoft. Then return to this document.
4
Insert the DP CD in your CD-ROM drive at the Windows NT
fileserver.
5
Use the mouse and Double click the Control Panel icon.
6
Then Double click the Printers icon.
7
Click Printers from the Print Manager Menu bar.
8
Select Create Printer. Then enter a unique printer name in the field
provided.
9
Click the drop-down arrow in the Drivers area.
10
Scroll to the bottom of the list and click Other...
11
Click the OK button.
12
Scroll the list if necessary and select the desired Printer and click
OK.
13
When driver is installed, enter a description in the Create Printer
Description area.
14
Click Drop-down Arrow in the Print to: area.
15
Scroll to the Other... entry.
Summary of Contents for DP
