manualshive.com logo in svg

Oki OKIFAX 5950, Maintenance Manual

Share
Download
Oki OKIFAX 5950 Maintenance Manual Download Page 97

OF5750/5950 Series    January 2001

1 - 88

1.6.17

Broadcast Confirmation Report

Method:
The report will be manually or automatically printed out.

Descriptions:

1. Title of the report
2. Date and time when the report was printed
3. Sender ID
4. Total numbers of pages in particular communication
5. Specified transmission time

(Time is not printed by automatic print out mode.)

6. Total transmission time
7. Required transmission address (Speed dial)
8. Registered location ID (Speed Dial) or Identification of the remote station.
9. Required transmission address (Ten key dial)

10. Transmitted number or pages for each address

11. Identification of the result of communication

Descriptions enabled of Email address for Internet FAX and Fax2Net specified to Speed Dial
001 to 040 and LOCATION ID column of the keypad.
• Character string containing the lower-case alphabetic characters and symbols
• Speed Dial:

Descriptions of maximum 24 characters.  If exceeding 24 characters,

description starts from the top.
Keypad: All 64 characters enabled

• Since simultaneous transmission of Internet FAX effects transmission to respective ad-

dresses at one time, the result will be either all OK or failure (NG).

1.6.18

Relay Broadcast Entry Report

When the relay personal box is opened, the relay broadcast entry report can be output in the
specified operation of the delivery address.   (Format is the same as the conventional broad-
cast entry report but the following description only deffers.)

12/24/2000  19:19

ID=ODC

     PERSONAL BOX = 10

     LOCATION ID

LOCATION ID

 1 = 1234567890123456789012345678901234567890

10 = OKI DATA

20 = ODS

RELAY BROADCAST ENTRY REPORT

Personal Box No. is described.

1.6.19

G3 Log Report

Newly outputs debug log information by the firm of G3 option board.
Report format is identical with MCNT and the log information by the firm of G4 option.

Summary of Contents for OKIFAX 5950










































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands