manualshive.com logo in svg

Oki OKIFAX 5950, Maintenance Manual

Share
Download
Oki OKIFAX 5950 Maintenance Manual Download Page 500

DESCRIPTION OF
PRINT OPERATIONS

OF5750/5950 Series    January 2001

B - 8

4) Developing

Toner is attracted to the electrostatic latent image on the EP (image) drum surface to
convert it into a visible toner image.  Developing takes place at the contact between the
EP (image) drum and the developing roller.

1

As the toner supply roller rotates while rubbing on the developing roller, a friction
charge is generated between the developing roller and the toner, allowing the toner
to be attracted to the developing roller.  (The developing roller surface is charges
positive and the toner, negative.)

-265V

-800V

-100V -800V

-800V

Developing roller

Toner

Image drum

-100V

Exposed

part

Exposed

part

An illustration of activities at the contact point of the
image drum surface and the developing roller (arrow
marks denote the direction of the electric field).

+

—

+

—

+

—

+

—

+

—

+

—

+

—

+

—

+

—

+

—

+

—

+

—

+

—

+

—

+

—

+

—

+

—

+

—

+

—

+

—

+

—

+

—

+

—

+ + + + + + + + + + + + + + + + + + + + + + +

2

The toner attracted to the developing roller is scraped off by the doctor blade, form-
ing a thin coating of toner on the developing roller surface.

3

Toner is attracted to the exposed part (low-potential part) of the EP (image) drum at
the contact between the EP (image) drum and the developing roller, making the
electrostatic latent image visible.

Doctor blade

Developing roller

EP drum

Charge roller

Toner supply roller

Summary of Contents for OKIFAX 5950










































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands