manualshive.com logo in svg

Oki OKIFAX 5950, Maintenance Manual

Share
Download
Oki OKIFAX 5950 Maintenance Manual Download Page 183

OF5750/5950 Series    January 2001

2 - 76

Table 2.9.5.2  ID/Password Prg. (1/4)

   No.

Item

Specifications

01

TSI/CSI

03

Sender ID

Register a TSI/CSI (local telephone number).

1) Number of characters used to register a TSI/CSI

20 characters (ten-keys 0-9/HYPHEN (+)/SPACE/+)
* The setting data must be transferred to the G4 board.

Register a TSI/CSI (local telephone number)
(For the option line)

1) Number of characters used to register a TSI/CSI.

20 characters (ten-key 0-9/HYPHEN (+)/SPACE/+)
* This setting is disabled when G3 OPTION is not installed.

Register a sender ID.

1) Number of characters used to register a sender ID

32 characters
Ten-keys 0-9/*/#/alphabetic characters (uppercase and
lowercase characters)/special characters/PAUSE/HYPHEN/
SPACE/+
* The setting data must be transferred to the G4 board.

Open/close a personal box (confidential and bulletin relay
broadcast).
When the specified box has not been opened: “CONFIDEN-
TIAL” or “BULLETIN POLLING RELAY BROADCAST” can be
selected.
When the specified box is opened as a confidential box,
“CONFIDENTIAL” or “CLOSE” can be selected.
When the specified box is opened as a bulletin, “BULLETIN
POLLING” or “CLOSE” can be selected.
When the specified box is opened as a relay broadcast, “RE-
LAY BROADCAST” or “CLOSE” can be selected.

1) Number of personal boxes

OKIFAX5750/5950:  16 boxes (1-16)
* The user can set these 16 boxes as confidential and

bulletin boxes as desired.

2) Confidential

A box used only for confidential reception.
Either sub frame or Oki mode (NSF) can be selected.
When a confidential box is opened, a password must be
registered so that other persons cannot print data.
Password:  4 digits (0-9 only)

3) Bulletin Poll

A box used for bulletin transmission.  It is opened to multiple
persons. (Password setting is not required.)
An SEP frame can be used for bulletin transmission.
A document is assigned to a box so that data can be ob-
tained from this box.

04

Personal Box

02

TSI/CSI OPTION

Summary of Contents for OKIFAX 5950










































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands