manualshive.com logo in svg

Oki OKIFAX 5950, Maintenance Manual

Share
Download
Oki OKIFAX 5950 Maintenance Manual Download Page 69

OF5750/5950 Series    January 2001

1 - 60

1.6.9

Relay Broadcast Confirmation

Method:
The report will be sent out upon return when the distribution is completed.

Descriptions:

1. Title of the report
2. Date and time when the report was printed
3. Sender ID
4. Total numbers of pages in particular communication
5. Specified transmission time (Time is not printed by automatic print out mode.)
6. Total transmission time
7. Required transmission address (Speed dial)
8. Registered location ID (Speed dial) or Identification of the remote station.
9. Required transmission address (Ten key dial)

10. Transmitted number or pages for each address

11. Identification of the result of communication

The report format for the confirmation of relay broadcast and printing by own station repre-
sents the modification of the title only of “1.6.17  Broadcast Confirmation Report” for automatic
output as stated below:
“BROADCAST CONFIRMATION REPORT” to “RELAY BROADCAST CONFIRMATION”

Summary of Contents for OKIFAX 5950










































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands