manualshive.com logo in svg

Oki OKIFAX 5950, Maintenance Manual

Share
Download
Oki OKIFAX 5950 Maintenance Manual Download Page 82

OF5750/5950 Series    January 2001

1 - 73

1.6.13

Power Outage Report

Purpose:
To indicate AC power failure and recovery and in case of destruction of accumulated picture
data in the memory. the information printed on the Power Outage Report is not printed out on
the Activity report.

Method:
If received communications are lost due to power failure, this report is output automatically at
power recovery.

Descriptions:

1. Title of the report
2. Date and time when the report was printed.
3. Sender ID
4. Reserved/transmission date
5. Reserved/transmission time
6. Communication time
7. Identification of the remote station
8. Mode of the communication

CONF(Confidential reception)/CALLED(Memory reception)/B.C(Broadcast TX)

9. Total number of reserved documents or transmitted pages

10. Result of the communication

LOST

1.6.13.1 Difference from OKIFAX5700/5900

Same as “1.6.11 Activity Report.”
However, description of MODE column for Fax2Net (G3) transmission will be “CALLING”
instead of “FNET.”

Summary of Contents for OKIFAX 5950










































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands