manualshive.com logo in svg

Oki OKIFAX 5950, Maintenance Manual

Share
Download
Oki OKIFAX 5950 Maintenance Manual Download Page 487

OF5750/5950 Series    January 2001

A3 - 59

G4A

A3.7 G4A-PCB

This PCB board is optionally available.  Using this board allows the system to be ready for the
G4 protocol.  This board is connected to the MCNT board through the Oki’s original MUPIS
interface.

The block diagram of this board is shown on the next page.

This board is connected to the MCNT board with an 80-pin connector (CN1).  Sixteen pins of
this connector are signals lines dedicated to the G4A board, and the remaining 64 pins are
signal lines shared with the optional LAN network board.  The LAN network board is connected
to the 64-pin connector (CN2) when it is used along with this board.  It is connected to the line
via the RJ-45 connector (CN3).

Data is transferred to/from the CPU on the MCNT board via the 2-KB dual port RAM.  When
data is sent, the MCNT board causes an interrupt to the G4A board using a CUREQ-N signal
and writes data into the 2-KB dual port RAM.  The G4A board expands the data from the dual
port RAM in the DRAM, and sends the expanded data to the line via the driver.

When data is received, the G4A board causes an interrupt to the MCNT board using an
OPREQ signal and writes data from the DRAM into the dual port RAM.  The NCNT board
reads data from the dual port RAM, expands the data in the DRAM on the MCNT board, and
sends the data to the LED head via the IOGA5.

Summary of Contents for OKIFAX 5950










































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands