Oki OKIFAX 5950 Maintenance Manual Download

Page: 294 / 553

OF5750/5950 Series January 2001

4 - 22

4.3.19

Scanner Motor

1. Remove the scanner latch.

2. Remove the motor cable and unscrew

two screws (1) to remove the motor
along with the bracket.

Caution: Do not remove the four

screws* securing the motor.

3. Remove the bracket and ground plate by

unscrewing two screws.
Remove the Idle gear by releasing the
E-ring.

4. Remove the damper by unscrewing two

screws.

Caution: As a maintenance part, the

damper is available separately
from the motor. Keep the
damper without throwing it
away.

Precautions for Installation

1. When installing the damper, pay atten-

tion to its orientation and screw posi-
tions.

2. When installing the bracket and ground

plate, check for their positions.

Two screws

Motor

Bracket

Four motor screws*

Scanner latch

Ground plate

Two screws

Bracket

Idle gear

E-ring

Damper

Two screws

Summary of Contents for OKIFAX 5950










































































































































































































































































































































































































































































































































































Search results

Summary of Contents for OKIFAX 5950

Reviews:

Related manuals for OKIFAX 5950

Brands by name

Popular brands

Oki OKIFAX 5950, Maintenance Manual

Search results

Summary of Contents for OKIFAX 5950

Reviews:

Related manuals for OKIFAX 5950

Brands by name

Popular brands