Oki OKIFAX 5950, Maintenance Manual

Page: 154 / 553

OF5750/5950 Series January 2001 2 - 47
35 Print Priority
No. Item Specifications
33 Toner Count Clear
34 Parallel Pick Up
Counter display Counter clear
Service bit Service bit Remarks
OFF ON OFF ON
Drum total
Print
Scan
Can be
replaced by user
Display
clear
Various
counters
Drum
Can be
replaced by user
Toner
This function
is set to
ON:
OFF:
36 RELAY BROADCAST
Table 2.9.2.3 Technical Functions: Setup (9/11)
Determine whether the toner counter can be cleared regardless
of the service bit setting (ON/OFF).
1) Setting values
ON (Can be cleared)/OFF (Cannot be cleared)
Determine whether parallel pickup is enabled.
To control a receiving fax by 2 digits (the same digits as remote
reception) from a telephone set connected parallel to the
telephone line.
1) Setting values
ON (Enabled)/OFF (Disabled)
Determine whether the memory is mainly used for printing.
This setting is required to rescue the image data that cannot be
stored in the page memory if ACC compression is carried out
during PC/LAN printing.
1) Setting values
Relationships between settings and page memory capaci-
ties are as follows:
ON (2560 KB)/OFF (1844 KB)
This setting becomes effective by restarting the equipment
(turning off the equipment at first and then turning on the
equipment) after the setting change.
Sets up whether to make relay broadcast.
1) Setting value
ON (Make relay broadcast) / OFF (Make no relay broadcast)
* Opening relay broadcast box disabled when this setting is
OFF.
* In the case of OKIFAX5750, setting is skipped. (Only
OKIFAX5950 operable)