manualshive.com logo in svg

Oki OKIFAX 5950, Maintenance Manual

Share
Download
Oki OKIFAX 5950 Maintenance Manual Download Page 273

OF5750/5950 Series    January 2001

4 - 1

4.

General

The section explains the procedures for replacement of parts, assemblies, and units in the
field.  Only the disassembly procedures are explained here.  For reassembly, reverse the
disassembly procedure.

4.1

Precautions for Parts Replacement

(1) Before starting to replace parts, remove the AC cord.

(a) Remove the AC cord in the following sequence:

1. Turn off ("o") the power switch of the machine.
2. Disconnect the AC inlet plug of the AC cord from the AC receptacle.
3. Disconnect the line cable from the machine.

(b) Reconnect the machine in the following procedure:

1. Connect the AC cord and line cable to the machine.
2. Connect the AC inlet plug to the AC receptacle.
3. Turn on ("l") the power switch of the machine.

DANGER

Do Not 
Touch !

HIGH VOLTAGE

You may be subjected to high-voltage electric shock by touching the 
following parts without an insulating material:

a.  High-voltage unit
b.  Low-voltage
c.  Contact ass'y
d.  Power supply unit

*  The high voltage risk may continue for about 3 days after power-off.
*  Never touch the power supply unit pattern.

PC board
PC board

Summary of Contents for OKIFAX 5950










































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands