manualshive.com logo in svg

Oki OKIFAX 5950, Maintenance Manual

Share
Download
Oki OKIFAX 5950 Maintenance Manual Download Page 116

OF5750/5950 Series    January 2001

2 - 9

• Take out the toner cartridge from the damp proof  bag, shake it five or six times as

shown in the illustration to eliminate the toner deflection, and peel off the seal gently.

Figure 2.5.3  Toner Cartridge Installation (3)

• Ensure that the plastic tab on the light-hand side of the toner cartridge recess line up

with the groove on the toner cartridge.

• Press down on both ends to make sure the cartridge is fully seated.

Figure 2.5.4  Toner Cartridge Installation (4)

• Press the gray lever forward until it stops.

Seal

Toner cartridge

Summary of Contents for OKIFAX 5950










































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands