manualshive.com logo in svg

Oki OKIFAX 5950, Maintenance Manual

Share
Download
Oki OKIFAX 5950 Maintenance Manual Download Page 171

OF5750/5950 Series    January 2001

2 - 64

   No.

Item

Specifications

7

FAX NETWORK PRG.

Table 2.9.4.1  Location Program (5/5)

Make settings concerning FAX2NET service.

1) Set values

This setting consists of the following three settings:

•

SERVER NO.
Telephone number of FAX2NET server to be used.
When setting PBX, it is necessary to register a number
including the Dial Prefix for switching PBX to PTT.

*

This will be the object of collation of closed communication
service.

40 digits (Numerals (0 to 9)/*/#/PAUSE/HYPHEN/SPACE/+)

•

ACCOUNT NO.
ID proper to a terminal registered to FAX2NET service
16 digits (Numerals (0 to 9) only

•

PREFIX NO.
A number for making judgement on the start of FAX2NET
service (FAX over IP); (3 types)
FAX2NET server is called when the leading portion of the
opposite party’s telephone number coincides with the regis-
tered number.
When setting Dial Prefix, the number following the dial prefix
(and subsequent hyphen/blank/pause/+).will be compared.

10 digits (Numerals (0 to 9) only)

*

If the address of communication in the state of queuing
contains Email Address/Web URL, change of setting is
inhibited (ILLEGAL OPERATION).

*

Imperative to have SERVER TEL..NO. /ACCOUNT NO.
registered.  If either one is cleared, the other will be cleared.

Summary of Contents for OKIFAX 5950










































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands