Oki OKIFAX 5950, Maintenance Manual

Page: 215 / 553

OF5750/5950 Series January 2001 2 - 108
63 Continuous Tone
64 PC/FAX Switch
66 Ring Response
No. Item Specifications
65 CNG Count
62 T/F Timer Prg.
Table 2.9.5.5 Incoming Options (2/3)
Set the time till start of automatic reception when the operator
has performed no operation for the call terminated in the TEL/
FAX mode.
1) Setting values
20SEC/35SEC selectable
* Selection is skipped over when the ISDN board is mounted
(selection allowed if SERVICE BIT = ON).
Set up the reception completion buzzer.
The buzzer sound can be stopped by pressing the STOP key.
1) Setting values
ON (Sounded)/OFF (Not sounded)
Determine whether the FAX reception mode is to be selected
automatically when PC reception is impossible.
1) Setting values
ON: Selects the FAX reception mode.
Fax transfers received faxes directly to PC.
OFF: Does not select the FAX reception mode (reception
disabled).
Fax receives and prints the message.
When T/F, TAD, or Parallel pickup is operating in CNG signal
detection processing, this setting can be shifted to the facsimile
reception mode at the time of number of CNG signal detection
times are equal to the set values.
1) Setting values
1 - 5 (in one-tray steps)
* Selection is skipped over when the ISDN board is mounted
(selection allowed if SERVICE BIT = ON).
[Sets the time from arrival of a ring to line seizure
1) Setting values
1 ring/5 sec/10 sec/15 sec/20 sec
* Selection is skipped over when the ISDN board is mounted
(selection allowed if SERVICE BIT = ON).