Oki OKIFAX 5950, Maintenance Manual

Page: 24 / 553

OF5750/5950 Series January 2001 1 - 15
No. Item Specifications
17 Recording resolution
18 Copy resolution
19 Recording method
20 Recording paper skewing
21 Copy darkness
22 Copy uniformity
23 Recording paper running out
24 Minimum scan line time for
receiving
Horizontal
• 600 dot/inch
Vertical
• 300 dot/inch (EX-FINE), 15.4 line/mm (EX-FINE), 7.7
line/mm (FINE), or 3.85 line/mm (STD)
Variable:
• STD: 200 dot/inch x 3.85 line/mm
• FINE/PHOTO: 300 dot/inch x 300 dot/inch
• EX-FINE: 600 dot/inch x 15.4 line/mm, 600 dot/inch x
600 dot/inch*
* This function can be set only when 8 MB option
memory board is installed and 600 DPI Function is
set to ON (User setting).
Electro-photographic printing
• 211.3 mm (4992 bits) LED print head
Maximun allowable skew is + or - 1 mm over any
advance of 100 mm.
1) Black image: Greater than 1.2 OD *
2) White background (unprinted area): Not greater
than 0.2 OD
Note: OD: (Optical dencity)
Printed copies will exhabit a uniform density of printed
and background areas:
1) From edge to edge: 25%
2) From copy to the next copy: 30%
The fax can detect the no-paper condition by a
photosensor.
When the paper has run out in the local copy opera-
tion, the scanning will stop with “PAPER JAM” on the
LCD and an ALARM LED turn on without an alarm
tone.
When the paper has run out while a message is being
received and the no-paper reception is activated, the
LCD display will show “MSG. IN MEMORY”, and the
Alarm LED turn on.
0 ms, when receiving in ECM mode of from an Oki
Data facsimile.
5 ms at 15.4 line/mm or 7.7 line/mm and 10 ms at 3.85
line/mm when receiving from a non-Oki Data facsimile
or non-ECM mode.
STD
Fine
Ex-Fine (15.4 line/mm)
Ex-Fine (300 dot/inch)
Ex-Fine (600 dot/inch) 3.85 ~ 4.96
7.7 ~ 9.93
15.4 ~ 19.87
300 ~ 387
600 ~ 774 3.85 ~ 5.28
7.7 ~ 10.57
15.4 ~ 21.15
300 ~ 412
600 ~ 824
A4
Letter