manualshive.com logo in svg

Oki OKIFAX 5950, Maintenance Manual

Share
Download
Oki OKIFAX 5950 Maintenance Manual Download Page 86

OF5750/5950 Series    January 2001

1 - 77

1.6.15

Active Memory File

Method:
The report will be manually or automatically printed out for information of transmission/recep-
tion data stored in the memory. When there is no stored image data in the memory at all, the
Active Memory Files is not printed out.

Descriptions:

1. Title of the report
2. Date and time when the report was printed.
3. Sender ID
4. RECEPTION (Memory reception)

• Prints the information of no paper/no toner reception
• Enters is the number of received communication times stored in the memory.
• Pages is the number of total pages of the reception messages stored in the memory.

5. TRANSMISSION (Delayed transmission, standby of redial)

• Prints the information of Delay memory transmission and Redial. However, Polling RX

information is printed out on the below item 6.

• Prints the communication date and time, distant station ID, Mode and Pages

6. POLLING TX/RX

• Prints the information of Polling RX or Polling TX of used Box.
• Polling TX prints Mode column and number of read pages.

When Feeder Polling TX, the number of read pages is a blank.

• Polling RX prints the communication date and time, distant station ID and Mode.

7. PERSONAL BOX (Confidential, Bulletin Poll)

• Prints the opened condition of Personal Box.
• Mode shows the type of Box.
• Enters prints the number of receipt times stored in the memory.
• Pages prints the number of total pages of each Box.

Summary of Contents for OKIFAX 5950










































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands