manualshive.com logo in svg

Oki OKIFAX 5950, Maintenance Manual

Share
Download
Oki OKIFAX 5950 Maintenance Manual Download Page 91

OF5750/5950 Series    January 2001

1 - 82

1.6.16

Broadcast Entry Report

Method:
The report will be manually or automatically printed out.

Descriptions:

1. Title of the report
2. Date and time when the report was printed
3. Sender ID
4. Required transmission address (Speed dial)
5. Registered location ID
6. Required transmission address (Ten key dial)

1.6.16.1 Difference from OKIFAX5700/5900

Descriptions enabled of Email address for Internet FAX and Fax2Net specified to Speed Dial
001 to 040 and LOCATION ID column of the keypad.
• Character string containing the lower-case alphabetic characters and symbols
• Speed Dial: Descriptions of maximum 40 characters.  If exceeding 40 characters, description

starts from the top.

Keypad:

All 64 characters enabled

Summary of Contents for OKIFAX 5950










































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands