manualshive.com logo in svg

Oki OKIFAX 5950, Maintenance Manual

Share
Download
Oki OKIFAX 5950 Maintenance Manual Download Page 462

R76-

OF5750/5950 Series    January 2001

A3 - 34

(6) Fusing

After the end of the transfer operation, the unfused toner image is fused on the paper
under heat and pressure as it passes between the heater roller and the back-up roller.
The heater roller with a Teflon coating incorporates a 500 W heater (Halogen lamp),
which heats the heat roller.

A thermister, which is in contact with the heater roller regulates the heater roller at a
predetermined temperature (about 185 ½C for OKIFAX 5000 series).  A safety thermostat
cuts off voltage supply to the heater by opening the thermostat in the event of abnormal
rise in temperature.

The back-up roller is held under a pressure of 3.76 kg applied by the pressure spring on
each side.

Pressure Spring

Separation claw

Heater

Heater roller

Thermistor

Back-up roller

Summary of Contents for OKIFAX 5950










































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands