manualshive.com logo in svg

Oki OKIFAX 5950, Maintenance Manual

Share
Download
Oki OKIFAX 5950 Maintenance Manual Download Page 266

OF5750/5950 Series    January 2001

3 - 2

Process

Illustration

Description

3.1

Fundamentals of the Electro-Photographic Process

The electro-photographic process involves six sub-processes:
(1) Charging (2) Exposure (3) Development (4) Transfer (5) Fusing (6) Cleaning

Outline of each process is explained below.

The  surface of the electro-
photographic Image drum is
uniformly charged with negative
charges by applying a negative
voltage to the charge roller.

When the applied DC voltage
exceeds a threshold value, charg-
ing of the drum begins.

Light emitted from the LED head
irradiates the negatively charged
surface.
The potential of the irradiated part
of the Image drum surface is
raised, so that an electrostatic
latent image associated with the
print image is formed.

Toner is attracted to the exposed
part (high-potential part) of the
Image drum at the contact be-
tween the Image drum and the
developing roller, making the
electrostatic latent image visible.

At the same time, the residual
toner on the Image drum is
attracted to the developing roller
by static electricity.

Charging

1

Charge roller

EP drum

Development

3

Power

Supply

Charge roller

EP drum

Exposure

2

LED head

EP drum

Developing roller

Power

Supply

Summary of Contents for OKIFAX 5950










































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands