Oki OKIFAX 5950, Maintenance Manual

Page: 214 / 553

OF5750/5950 Series January 2001 2 - 107
Table 2.9.5.5 Incoming Options (1/3)
Setting values are defined for each default type.
For more details, see Incoming default settings.
The setting data must be transferred to the G3 Option side.
No. Item Specifications
60 Incoming Ring
61 Remote Receive
Set up the soft ringer.
Instead of ringer circuit, software can control built-in speaker to
ring sound.
1) Setting values
ON (Sounded)/OFF (Not sounded)/DRC (Sounded during
DRC detection)
* Selection is skipped over when the ISDN board is mounted
(selection allowed if SERVICE BIT = ON).
* If DISTINCTIVE RING is settable, ON/OFF/DRC is select-
able.
(“Settable” means that SERVICE BIT is ON or mask by
XPARA is not provided with SERVICE BIT = OFF.)
* If DISTINCTIVE RING cannot be set, ON or OFF is select-
able.
* Setting is possible if SERVICE BIT is ON even though
masking is done by XPARA. In this case, if SERVICE BIT
is turned OFF with this setting set to DRC, setting is
changed from DRC to the default (i.e. initial value provided
for each default type).
* If COUNTRY CODE is USA, AUS, NZL, SIN, or HNG, this
setting is set to DRC. If COUNTRY CODE is changed to
any other country, setting is changed from DRC to the
default.
Set a remote access address.
This function is used to transfer a call received by an external
telephone set (connected to fax) by entering two-digit MF tones
if the remote receive setting is not OFF.
When this function is off, control of Parallel Pick Up doesnt do it
at all regardless of ON/OFF of Parallel Pick Up setting.
1) Setting values
Select one of the following:
OFF/00/11/22/33/44/55/66/77/88/99/**/##
* Selection is skipped over when the ISDN board is mounted
(selection allowed if SERVICE BIT = ON).