Oki OKIFAX 5950, Maintenance Manual

Page: 28 / 553

OF5750/5950 Series January 2001 1 - 19
No. Item Specifications
• Installing the NIC card for OKIFAX 5750/5950
provides Network print service as an option.
1) Network 3.1x, 4.1x
2) TCP/IP
3) Windows NT/95/98/3.1
4) T600dpi, 10 ppm
Note: For details, see Product Spec. “Network Print
Service”
This function can be used when Option LAN board is
installed.
E-mail base (ITU-T T.37 simple mode) Internet-Fax
uses a internet mail protocol the same as general mail
client.
- Internet-Fax convertes a scanning data to Tiff-f
(Tagged Image File Format) and send it by using
SMTP (Simple Mail Transmit Protocol) Protocol via
JCI-NIC.
- Internet-Fax accesses the Mail server in the interval
by using POP3 (Post Office Protocol version 3)
Protocol via JCI-NIC and get a E-mail with Tiff-file.
(Interval time: 0 - 60 min.)
The following functions are supported:
• I-Fax Sending
• I-Fax Receiving
• Gateway Service 1
• Gateway Service 2
• I-Fax Service
Note: For details, see Product Spec. “ Internet Fax
Kit”.
The follwing four modes are supported.
1) G4 function
2) ISDN G4 communication
3) ISDN G3 communication
4) ISDN Report and List
Note: For details, see Product Spec. “ISDN G4 option
system specifications”.
This function enables the sumltaneous use of G4 and
G3 protocols.
Note: For details, see Product Spec. “ Dual Mode
Communications”
Both 1st line and 2nd line (Dual line) can be connected
to a same network type(PSTN/PBX). Communication
for G3 Dual Line is enabled only memory TX/RX.
Note 1: When the G3A option board is installed, other
option board (G4A/JCI NIC board) cannot be
used.
Note: For details, see Product Spec. “G3 Dual Line
Function”.
38 Internet FAX Kit: E-mail type
(option)
39 ISDN G4 (option)
40 Dual Mode Communication
(option)
41 G3 Dual Line Function (option)