manualshive.com logo in svg

Oki OKIFAX 5950, Maintenance Manual

Share
Download
Oki OKIFAX 5950 Maintenance Manual Download Page 29

OF5750/5950 Series    January 2001

1 - 20

No.

Item

Specifications

42

600DPI Communication

43

Relay Broadcast Function

44

FAX2NET:  Provider type (option)

45

Power supply unit and Power
consumption of the machine

Resolution of 600dpi (transmissionreception, and
copy) is made possible with 8-MB option memory
mounted.
Note: For details, see Product Spec. “ 600dpi Com-

munication”.

• G4 communication supports Oki mode relay broad-

cast only.

• G3 communication supports both Oki mode relay

broadcast and F code relay broadcast.

Note: For details, see Product Spec. “Relay Broad-

cast Function”.

The FAX2NET service is facsimile communication
service using the four FAX2NET-supplied internet. Of
the FAX2NET-supplied functions, the following func-
tions are mounted in the OKIFAX 5750/5950.
• Fax over IP
• Fax to E-mail
• Virtual E-mail
• Web Retrieval
Note: For details, see Product Spec. “FAX2NET

Specifications”.

Power consumption of the machine (Typical power
without optional board)
1) US/CANADA version

2) INT’L version

Note: (  ): When power save mode is set to ON.

Chart: ITU-T No.1

Mode

Typical power (W)

Transmit

25 W

Receive

325 W

Local copy

330 W

Standby

9.0 W

Mode

Typical power (W)

Transmit

25 W

Receive

325 W

Local copy

330 W

Standby

9.3 W (0.5 W)

Summary of Contents for OKIFAX 5950










































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands