manualshive.com logo in svg

Oki OKIFAX 5950, Maintenance Manual

Share
Download
Oki OKIFAX 5950 Maintenance Manual Download Page 299

OF5750/5950 Series    January 2001

4 - 27

4.3.26

Back-up Roller, Transfer Roller

1. After removing the Lower Base, remove

the spring.

2. Lift the left side of the Back-up Roller

and pull it out leftwards.

Caution:
-  Do not lose the ground washer.
-  Do not bend the ground plate.
-  Do not damage the backup roller.

3. Release the gear by unlocking the latch

on the Lower Base.

4. Lift the right side of the Transfer Roller

and shift rightwards, then pull it out from
the Lower Base.

Upper Cover

Back-up Roller

Reset lever (L and R)

Spring

Lower Base Latch

Gear

Transfer Roller

Washer

Ground plate

Summary of Contents for OKIFAX 5950










































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands