manualshive.com logo in svg

Oki OKIFAX 5950, Maintenance Manual

Share
Download
Oki OKIFAX 5950 Maintenance Manual Download Page 10

OF5750/5950 Series    January 2001

1 - 1

1.

GENERAL INFORMATION

1.1

General Performance

(1) Type of appearance

• Desktop type

(2) Applicable lines

• PSTN (Public switched telephone network
• PBX (Private branch exchange) telephone line
• ISDN (Integrated service digital network)
• FAX2NET Internet Fax (via PSTN)
• E-mail Internet Fax (via LAN)
Note: ISDN and Internet Fax are option.

(3) Compatibility

• ITU-T Group 3 facsimile transceiver
• ITU-T Group 4 facsimile transceiver (option)

(4) Document width

• Max. 216 mm (NA Letter)
• Min. 148 mm (ISO A5 size)

(5) Effective reading width

TX • 215.4 mm (NA Letter)

COPY • 208.6 mm (NA Letter)

• 208.6 mm (ISO A4 size)

• 208.6 mm (ISO A4 size)*1

* Printing width will be 206 mm.

(6) Scanning length

• 128 mm to 356 mm

Length setting: Long documents (1500 mm) are also available.

(7) Automatic document feeder (ADF)

• 50 sheets (NA Letter/A4-size: 20-lb/75gm Oki Data recommended paper)
• 30 sheets (NA Letter/A4-size: 16 to 28-lb/60 to 105gm)

(8) Recording paper

• 1st cassette:

NA Letter/NA Legal/A4-size plain paper cut 250 sheets capacity
(20-lb/75gm)

• 2nd cassette (option): NA Letter/NA Legal/A4-size plain paper cut 500 sheets capacity

(20-lb/75gm)

• Manual paper feeder:

Transparency for overhead projector, applicable.
Sheet size: NA Letter/NA Legal/A4-size
*: Oki Data recommended paper

(9) Printable width

• NA Letter:

211.3 mm (203.2 mm for assured quality)

• NA Legal:

211.3 mm (203.2 mm for assured quality)

• ISO A4:

206.0 mm (197.3 mm for assured quality)

(10) Printable length

• NA Letter:

273.4 mm (266.7 mm for assured quality)

• NA Legal:

349.6 mm (342.9 mm for assured quality)

• ISO A4:

291.0 mm (284.3 mm for assured quality)

(11) Copy stacker

• Face down stacking: Max. 200* sheets
• Face up stacking:

Max. 10* sheets

*Note 1: Oki Data recommended paper
 Note 2: Face down or face up stacking is changeable by the lever.

Summary of Contents for OKIFAX 5950










































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands