Oki OKIFAX 5950 Maintenance Manual Download

Page: 239 / 553

OF5750/5950 Series January 2001

2 - 132

No.

Item

Specifications

DELETE POP MSG.

TIME BETWEEN GMT

TEXT PRINT

HEADER PRINT

CODING MODE

EX.FINE MODE

IFAX SENDER ID

Table 2.9.5.7 LAN Options (2/5)

Sets up whether to delete received mail from the mail server.

1) Setting value

OFF/TYPE1/TYPE2
OFF:

Not delete

TYPE1: Delete only printable mail
TYPE2: Delete all
* Setting enabled only when NIC TYPE2 (IFAX enabled) is

installed.

Sets up time difference from Greenwich Mean Time.
Used for creating a header for email.

1) Setting value

-12 to +12 (intervals of 1 hour)
* Setting enabled only when NIC TYPE2 (IFAX enabled) is

installed.

Sets up whether to print the text in the Email.

1) Setting value

ON (Print text)/ OFF (Not print text)
* Setting enabled only when NIC TYPE2 (IFAX enabled) is

installed.

Sets up printing of header attached to Email.

1) Setting value

OFF/TYPE1/TYPE2
OFF:

Not print

TYPE1: Print all
TYPE2: Print SUBJECT/FORM/TO only

Sets up the transmission compression mode.
Sets up the coding mode of images to attach to Email.

1) Setting value

MH/MR/MMR
* Setting enabled only when NIC TYPE2 (IFAX enabled) is

installed.

Sets up selection of high resolution mode (EX.FINE) with the
reading for Email.

1) Setting value

300 dpi/600 dpi
* Setting enabled when NIC TYPE2 (IFAX enabled) is

installed and that a memory of 8MB is installed.

Sets up whether to attach Sender ID when transmitting IFAX.

1) Setting value

ON (Attach sender ID)/ OFF (Do not attach sender ID)
* Setting enabled only when NIC TYPE2 (IFAX enabled) is

installed.

Summary of Contents for OKIFAX 5950










































































































































































































































































































































































































































































































































































Search results

Summary of Contents for OKIFAX 5950

Reviews:

Related manuals for OKIFAX 5950

Brands by name

Popular brands

Oki OKIFAX 5950, Maintenance Manual

Search results

Summary of Contents for OKIFAX 5950

Reviews:

Related manuals for OKIFAX 5950

Brands by name

Popular brands