Oki OKIFAX 5950, Maintenance Manual

Page: 161 / 553

OF5750/5950 Series January 2001 2 - 54
FAX (OKIFAX 5750/5950 etc.)
To Modem
SW
Line
Remote control
A
B
2.9.2.6 Outline of Parallel Pick Up
Parallel pick up is a function that controls a fax (to make a fax in receive mode) from a tele-
phone set connected parallel to a fax. The two possible parallel connections of telephone sets
A and B are shown in the figure.
Remote control: To control a fax from telephone set A
Parallel Pick Up (PP):
To control a fax from telephone set B.
• Why a PP function is needed !
As shown in the block diagram on the next page, telephone sets B, A, A’ and A” are con-
nected to a telephone line.
Since A, A’ and A” are connected to the line via fax, off-hook status of any of the telephone
sets can be detected by the OFF-HOOK Detector 16 in the block diagram.
However, off-hook status of telephone set B cannot be detected by the fax side.
• PP Control
When a normal ring arrives at the fax from the line, the CML 7 turns on resulting in the
formation of an AC loop via circuit 13. The AC loop makes it possible for the modem to detect
the AC signals. If a user hooks up telephone set B after the first ring and enters the MF 2-digit
special code in order to make the fax in the receive mode, then it becomes possible to detect
the MF signals along the remote.