Oce ColorWave 900, User Manual

Page: 119 / 320

[Reinforcement] Description Example
[Enabled] Glues the pre-punched strips to the
rear of the folded package.
NOTE
• The reinforcement strip
uses a binding size of
12mm (A).
• The package width size
(B) excludes the [Bind-
ing edge size] (A). So the
back panel consists of
the package width size
plus the binding edge
size (A+B).
• Only possible when
[Folding method] is
[With same size back].
A B
[Disabled] No glued strip.
[Folding method] Description Example
[Compact fold] Folded package, but the last fold
(backside) is shorter.
[With same size back] (DIN-
B). Folded package, but the last fold
(rear) is over the full width.
The previous fold could be shorter.
[With binding edge] (DIN-
A). Folded package, but the last fold
(rear) has additional width.
The previous fold could be shorter.
Fold settings for custom fold templates
Chapter 5 - Configure the print system 119