Oce ColorWave 900, User Manual

Page: 254 / 320

Update your system
Update the system software on the user panel
Introduction
You can update the system software on the user panel with a USB key that includes a new
version of the software.
Before you begin
For an update of the system software, get the packages for the system software update from your
local representative.
You need an NTFS formatted USB key. Make sure the update files ([Open source package
(*_os.sup)] and [Software package (*_sw.sup)]) are present under the [USB:\Packages] directory
of the USB key.
NOTE
• The update process deletes all jobs on the system.
• During the update process the system is unavailable for approximately 30 minutes.
• The update contains a complete update of the operating system.
Procedure
1. On the user panel tap on [System].
2. Tap on [System update] in the setup menu.
3. Log in as a System administrator or Power user. The update wizard appears.
4.
Insert the USB key into the USB port on the user panel.
5.
Follow the instructions of the wizard.
During the update the system is not available. When the update is finished the printer will restart.
Update your system
254 Chapter 9 - Maintain the print system