Oce ColorWave 900 User Manual Download Page 305

Page: 305 / 320

Input profile / standardization Description

[Graphics colors: CMYK input
color profile] - [ US Web un-
coated ]

This setting indicates an old offset press standard, formerly
used in the US to print separations and proofs on uncoated me-
dia.

[Graphics colors: Grayscale
input color profile] - [ Adobe
Gray 20% ]

Use this setting to transform the grayscale info based upon the
Adobe Gray 20% profile (Adobe specific dot gain 20%) to CMYK
ink usage.

[Graphics colors: Grayscale
input color profile] - [ sGray ]

Use this setting to transform the grayscale info based upon the
sGray profile (lightness scale sRGB with gamma 2.2) to CMYK
ink usage.

What is an input profile / standardization?

Chapter 12 - References

305

Summary of Contents for ColorWave 900

































































































































































































































































































































Search results

Summary of Contents for ColorWave 900

Reviews:

Related manuals for ColorWave 900

Brands by name

Popular brands

Oce ColorWave 900, User Manual

Search results

Summary of Contents for ColorWave 900

Reviews:

Related manuals for ColorWave 900

Brands by name

Popular brands