Oce ColorWave 900, User Manual

Page: 277 / 320

Ink pollution (droplets) on the back of the media
Script
Step Action
1 Adjust the printer margins.
Open Océ Express WebTools and set the printer margins [Preferences] - [Print job de-
faults] - [Printer properties] - [Printer margins] to 3 mm or more for CAD prints, or to
10 mm or more for Graphics Arts/GIS prints.
2 Clean the wiper roller compartments (see
Clean wiper roller compartments on
page 196 ).
3 Clean the print surface and the vacuum holes (see Clean the print surface and the vac-
uum holes on page 203 ).
4 Print cleaning sheets (see Print cleaning sheets on page 178 ).
5 If necessary, clean the media output section of the printer (see
Clean the media output
section of the printer on page 214
).
6 If necessary, clean the media input section of the stacker (see
Clean the media input
section of the stacker on page 216
).
7 Check whether the problem is resolved. If the problem persists, call your local Service
Provider.
Ink pollution (droplets) on the back of the media
Chapter 10 - Troubleshooting 277