Oce ColorWave 300, User Manual

Page: 282 / 356

The printer
Overview
Definition
This table gives an overview of the possible error messages and system messages of the
printer and refers to the possible solution.
#
Description / solution Error message / System mes-
sage
The media required for the job is not available on
the printer.
See
‘Replace / Install the media’ on page 256
'Required media not available'
The end of the roll of media is reached while you
print
See
‘Replace / Install the media’ on page 256
'Roll empty'
A door or cover is open, although you are not in
a wizard
See
‘Cover or door opened’ on page 284
'Close maintenance door' /
'Close top cover.'
A media jam occurred
See
‘Remove jammed media’ on page 286
'Remove media'
Excessive temperature or humidity.
See
‘Temperature or humidity out of range’ on page
288
'Temperature out of range'
/'Humidity out of range'
The carriage is away from its home position too
long
See
‘Carriage away from home position too long’ on
page 289
'Warning Carriage away from
home position too long'
Printhead error messages
The table below gives on overview of the printhead-related error codes.
Chapter 8 - System messages and solutions 282
Overview