Oce ColorWave 300, User Manual

Page: 269 / 356

Replace the maintenance cassette
Introduction
The maintenance cassette wipes the printheads and caps the printhead nozzles.
During the print process, the printhead carriage regularly moves to the right-hand side
of the printer to spit some ink droplets into the maintenance cassette. These actions are
necessary to keep the printheads in optimal condition.
After about 5000 m
2
of output (the exact value depends on the print modes you use) the
printer indicates that you must replace the maintenance cassette.
When to do
Replace the maintenance cassette when user panel displays the message 'Replace mainte-
nance tray'. The print quality can deteriorate. Replace the cassette as soon as possible.
Caution:
Do not remove the maintenance cassette when you are not in the wizard. You can seri-
ously damage the printheads. When you open the maintenance door outside the wizard,
an error message prompts you to close the door.
How to remove the maintenance cassette
1.
From the'HOME' screen select the 'System' tab.
2.
Select the 'Setup' tab.
3.
Use the scroll wheel to go to the 'Maintenance tray'('Replace maintenance tray') section.
4.
Open this section with the confirmation button.
5.
An introduction screen displays the message 'Use this wizard to replace the maintenance
tray.'
6.
Press the 'Next >' key.
Chapter 7 - Maintain the Océ ColorWave 300 multifunction printer 269
Replace the maintenance cassette