Oce ColorWave 300, User Manual

Page: 256 / 356

Replace / Install the media
Introduction
The standard configuration of the Océ ColorWave 300 contains two rolls of media .
Appendix A contains a list of the supported media types and media sizes.
This section describes how to remove and load a roll of media .
When to do
Change a roll when a job needs a media type or size that is not on one of the rolls.
Change the media type that is defined on the system when the defined media type and
the available media type do not correspond.
How to remove a roll of media
1.
Press the media unload button on the right-hand side of the roll.
[218] Press the media unload button
The medium automatically retracts from the printer.
Chapter 7 - Maintain the Océ ColorWave 300 multifunction printer 256
Replace / Install the media