Oce ColorWave 300 User Manual Download Page 275

Page: 275 / 356

■

the original support rollers (5)
Rotate the rollers to clean them.

■

the transparent contact plates (8)
Wipe off any soiled areas.

Wipe all the cleaned parts once again using a dry Masslin towel.

Warning:

Take care not to get your fingers caught in the scanner top cover.

Press the scanner top cover down gently with both hands to close it.

Note:

Check that the left and right scanner open levers are locked into position.

Chapter 7 - Maintain the Océ ColorWave 300 multifunction printer

275

Clean the scanner

Summary of Contents for ColorWave 300





































































































































































































































































































































































Search results

Summary of Contents for ColorWave 300

Reviews:

Related manuals for ColorWave 300

Brands by name

Popular brands

Oce ColorWave 300, User Manual

Search results

Summary of Contents for ColorWave 300

Reviews:

Related manuals for ColorWave 300

Brands by name

Popular brands