Oce ColorWave 300, User Manual

Page: 253 / 356

How to use the 'Print quality' wizard
1.
From the'HOME' screen select the 'System' tab.
2.
Select the 'Setup' tab.
3.
Use the scroll wheel to go to the 'Print quality'('Optimize print quality') wizard.
4.
Open this section with the confirmation button.
5.
Press the 'Next >' softkey to enter the wizard.
The screen displays the message 'Select roll to use'.
You can only calibrate on the defined media types. When calibration is not possible with
the loaded media, the system asks you to load the correct media. When calibration is
possible with one of the rolls, the system automatically uses the correct roll of media.
When calibration is possible with both rolls, continue with step 5.
Chapter 6 - Ensure the best output quality 253
Use the 'Print quality' wizard