Oce Color System 200 Operator'S Manual Download Page 7

Page: 7 / 197

How to Use This Manual

Operation Procedures

In this manual, the following marks are used in the explanation of the operation procedures, cautions, notes, and related
functions.

Gloss Adjustment

Press the

key.

If the power is not turned ON, see “Turning On

the Power” on p.2-2.

If the copier is in standby mode, press the

(Standby) key so that the screen shown at right

is displayed.

To adjust the copy exposure, press the

key

or the

key.

Press the GLOSS ADJUSTMENT key.

Place the original on the platen glass.

Remove any paper clips from the original before

placing it on the platen glass. The copier can be
damaged by foreign objects falling inside of it.

Indicates that this is a note concerning operation or an explanation
of a related function.

Indicates the title of the topic being explained on this page.

Indicates a hard key on the right side of the control panel.

Indicates the title and page number of a reference item.

Indicates a step in the operation procedure.

Indicates a key on the left side of the Control panel.

Indicates options, etc., required in order to use this function. (Refer

to the explanation at the bottom of this page.)

Indicates a note either containing information you should be
aware of regarding the operation, or an explanation of
restrictions. Always read these items in order to operate the
copier properly.

Indicates a key shown on the
touch panel display.

Shows the touch panel
display screen.

Illustration of operation

Indicates a function that can be used when the copier is
equipped with the optional Feeder.

Indicates a function that can be used when the copier is
equipped with the optional ED board.

Indicates a function that can be used when the copier is
equipped with the optional Editor.

(The page depicted above is for example purposes only, and is not actually found in this manual.)

Summary of Contents for Color System 200






































































































































































































Search results

Summary of Contents for Color System 200

Reviews:

Related manuals for Color System 200

Brands by name

Popular brands

Oce Color System 200, Operator'S Manual

Search results

Summary of Contents for Color System 200

Reviews:

Related manuals for Color System 200

Brands by name

Popular brands