Oce Color System 200 Operator'S Manual Download Page 49

Page: 49 / 197

1-37

Color Creation

Adding a frame

1. Press the FRAME key. (Only for patterns

2. Select the frame width and then press the OK key.

The Frame is set and the initial screen is displayed.

Specifying the pitch at which gradations repeat

1. Press the REPEAT key.

2. Select the pitch at which gradations repeat and then press the OK

key.
The pitch at which gradations repeat is set and the initial screen is
displayed.

The screen on the right is that shown when

pattern

is selected.

Even when a frame is set for Image gradation, if

there is no image within the frame, gradation can
not take place.

Making fine adjustments to the smoothness of gradations

1. Press the GRADATION ADJUST key.

2. Press either the

key or the

key to adjust the setting and then

press the OK key.
The smoothness of the gradations is set and the initial screen is
displayed.

Smoothness of the gradations.

SMOOTH

Summary of Contents for Color System 200






































































































































































































Search results

Summary of Contents for Color System 200

Reviews:

Related manuals for Color System 200

Brands by name

Popular brands

Oce Color System 200, Operator'S Manual

Search results

Summary of Contents for Color System 200

Reviews:

Related manuals for Color System 200

Brands by name

Popular brands