Oce Color System 200 Operator'S Manual Download Page 187

Page: 187 / 197

4-45

Color In Color (Combining Color Images)

14.

Another Area Composition can be set.

Press the OK key to finish.

Repeat steps 12 through 14 depending on the

number of images to be combined.

After setting Transparent Image or Blurred

Border, the TRANSPARENT IMAGE key and the

BLURRED BORDER

keys are shaded and can

not be selected.

15.

Place the background original on the platen glass.

Place the original face up and align it with the V mark on the platen glass.

16.

Press the SCAN key.

17.

Press the OK key.

The copier is now ready to make copies.

Press the

(Start) key without setting the original.

Summary of Contents for Color System 200






































































































































































































Search results

Summary of Contents for Color System 200

Reviews:

Related manuals for Color System 200

Brands by name

Popular brands

Oce Color System 200, Operator'S Manual

Search results

Summary of Contents for Color System 200

Reviews:

Related manuals for Color System 200

Brands by name

Popular brands