Oce Color System 200 Operator'S Manual Download Page 178

Page: 178 / 197

4-36

Character Composition (Combining Characters from a Black-and-White Original with a Color Original)

Multiple Editing

Carry out the following steps after setting Shift Text for a Character
Composition and making a copy.

Press the

CHARACTER COMPOSITION

key.

Press the EDIT SETTINGS key.

Press the key for the Multiple Editing to be set.

Set the Multiple Editing contents.

The ADJUST AREA key is shaded until an

area that has been previously set is selected.

The display in the area monitor does not

change until the OK key is pressed and the
settings values are confirmed.

Summary of Contents for Color System 200






































































































































































































Search results

Summary of Contents for Color System 200

Reviews:

Related manuals for Color System 200

Brands by name

Popular brands

Oce Color System 200, Operator'S Manual

Search results

Summary of Contents for Color System 200

Reviews:

Related manuals for Color System 200

Brands by name

Popular brands