4-35
Character Composition (Combining Characters from a Black-and-White Original with a Color Original)
5.
Press the ADJUST AREA key.
6.
Change the area position / area size.
N
Changing the area
Use the eight-direction keys to shift. Objects are shifted in 1 mm
steps.
X:
Shifted in the horizontal direction.
P
key to shift right,
O
key to shift left.
Y:
Shifted in the vertical direction.
M
key to shift up,
N
key to shift down.
P
Changes to location and changes to size can
not be carried out at the same time.
P
Changes to the location are used when the
designated size was correct, but the copy was
made with the position off-set. Only corrections to
the area can be made without moving the original
on the platen glass.
P
The width of movement is calculated as follows.
5mm
Edited area
5mm
Designated area
In this case, shift the original 5 mm to the left and 5
mm down.
N
Changing the area size
1. Press the ENLARGE/REDUCE AREA key.
2. Use the four-direction keys to change the area size.
P
If the SHIFT AREA key is pressed, the screen
returns to the Area Shift display.
P
Size corrections are only made when the
designated area size is not copied correctly. Only
corrections to the area can be made without moving
the original on the platen glass.
P
Changes can not be made to sizes of Polygon,
Free, Tracing, or enclosed area.
P
The correction value for the size is calculated as
follows.
5mm
Designated area
5mm
Edited area
In this case, enlarge shift the original -5 mm to the
right and -5 mm up.
7.
Press the OK key.
Follow on, continuing the series of operations.
Summary of Contents for Color System 200
Page 2: ...ic...
Page 84: ...1 72...
Page 190: ...4 48...
Page 191: ...I 1 Offset Plate Original Creating Color Separations of a Color Original Index Index I 2...
