Oce Color System 200, Operator'S Manual

Page: 114 / 197

3-6
Area Designation (Using the Edit Pen)
Area Designation (Using the Edit Pen)
Use the edit pen with this function and designate a specific area of the original for image editing.
There are two methods used for Area Designation.
N
Rectangular Area Designation: With the edit pen, designate an area by entering the corner points of two of the opposing
angles of the rectangular area.
N
Non-rectangular Area Designation: This method is used to designate circles, ovals, polygons, and other such areas.
P
In this manual, both rectangles and squares will be referred to as “rectangles.”
There are three editing methods:
N
Framing: Copies only the part of the image inside the designated area.
N
Blanking: Copies the image with the area inside the designated area blank.
N
Multiple
Editing: Copies the part of the original inside the designated area in a different editing function than that used to copy
outside the designated area (the entire original except the designated area). There are fourteen editing
functions:
Single Color
Color Filter Original Type
4-full Color/3-full Color Paint Color Balance
Color Conversion Text Editing Saturation Adjustment
Color Gradation Texture Hue Adjustment
Base Color Nega/Posi
L
Framing
k
L
Blanking
k
L
Multiple Editing
k
P
Only the last previous mode settings can hold area designation information when you press the Recall key. Also, non-rectangular, polygon,
free or trace area settings can not be reproduced.