1-35
Color Creation
There are four methods for selecting a color.
N
Select a color from the color palette.
(Color Palette Selection) (See p. 1-65.)
N
Select a color from the original.
(Designated Color Selection) (See p. 1-67.)
N
Select a color that was previously registered.
(Registered Color Selection) (See p. 1-69.)
N
Select a color from the color wheel.
(Color Wheel Selection) (See p. 1-70.)
P
If the copier is not equipped with the Editor, only
“Color Wheel Selection”, “Registered Color”, or
“Original Color (Ending color only) can be selected.
To select “Registered Color” or “Original Color”, first
press the C key to close the color percentage
window.
6.
Press the ENDING COLOR and select the colors.
There are five methods for selecting a color.
N
Select a color from the color palette.
(Color Palette Selection) (See p. 1-65.)
N
Select a color from the original.
(Designated Color Selection) (See p. 1-67.)
N
Select a color that was previously registered.
(Registered Color Selection) (See p. 1-69.)
N
Select a color from the color wheel.
(Color Wheel Selection) (See p. 1-70.)
N
Select the color of the original as it is.
(Original Color Selection) (See p. 1-71.)
Once a color is selected, the Color Gradation is set and the screen returns
to the display in step 1.
Summary of Contents for Color System 200
Page 2: ...ic...
Page 84: ...1 72...
Page 190: ...4 48...
Page 191: ...I 1 Offset Plate Original Creating Color Separations of a Color Original Index Index I 2...
