NXP Semiconductors MC9S12VRP64, Owner Reference Manual

Page: 492 / 555

MCU Electrical Specifications
MC9S12VRP Family Reference Manual Rev. 1.3
492 NXP Semiconductors
A.1.5 ESD Protection and Latch-up Immunity
All ESD testing is in conformity with CDF-AEC-Q100 stress test qualification for automotive grade
integrated circuits. During the device qualification ESD stresses were performed for the Human Body
Model (HBM) and the Charged-Device Model.
A device will be defined as a failure if after exposure to ESD pulses the device no longer meets the device
specification. Complete DC parametric and functional testing is performed per the applicable device
specification at room temperature followed by hot temperature, unless specified otherwise in the device
specification.
2 LINPHY supply voltage V
LIN
–32 42 V
3 High side driver supply voltage V
SUPHS
–0.3 42 V
4 Battery sensor input voltage VSENSE pin V
VSENSE_M
–27 42 V
5 Voltage difference V
DDX
to V
DDA
2

VDDX
–0.3 0.3 V
6 Voltage difference V
SSX
to V
SSA

VSSX
–0.3 0.3 V
7 Digital I/O input voltage sources V
IN
–0.3 6.0 V
8 HVI PL[5:0] input voltage (with external resistor R
EXT_HVI
= 10k

V
Lx
–27 42 V
9 High-side driver HS[1:0] V
PHS
0 V
SUPHS
+
0.3
V
10 Low-side driver LS[2:0] V
PLS
0 40 V
11 EXTAL, XTAL
3
V
ILV
–0.3 2.16 V
12 TEST input V
TEST
–0.3 10 V
13 Instantaneous maximum current
Single pin limit for all digital I/O pins
4
I
D
–25 +25 mA
14 Continuous current on LIN
5
I
LIN
± 200 mA
15 Instantaneous maximum current on EVDD (PP[2:0]) I
EVDD
–80 +25 mA
16 Instantaneous maximum current.
Single pin limit for EXTAL, XTAL
I
DL
–25 +25 mA
17 Storage temperature range T
STG
–65 155

C
1
Beyond absolute maximum ratings device might be damaged.
2
VDDX and VDDA must be shorted
3
EXTAL, XTAL pins configured for external oscillator operation only. EXTAL and XTAL are shared with 5V GPIO’s
4
All digital I/O pins are internally clamped to V
SSX
and V
DDX
, or V
SSA
and V
DDA
.
5
The current on the LIN pin is internally limited. Therefore, it should not be possible to reach 200mA anyway.
Table A-3. Absolute Maximum Ratings
1