Error Messages
Technical Information 240
• Fax File Formats
OmniPage supports fax files saved in to DCX, PCX or TIFF format.
Many fax boards can receive or convert files in these three formats.
Refer to your fax documentation for more information.
TIFF files must be 200, 300, or 400 dpi. 300 dpi is recommended. TIFFs
are stored and displayed as 300 dpi line art.
Error Messages
This section contains a list of some error messages that may appear in
OmniPage. They are listed alphabetically.
n
K bytes needed,
n
K available for operation. Please make
available some more disk space and try again.
This message means that the operation you are attempting needs more
than the maximum amount of virtual memory currently set.
To increase the amount of virtual memory available:
1
Choose
Memory...
in the Setup menu.
2
In the
Temporary file
section, locate the
Maximum
text box.
3
Delete the number in the box and type in a number that is equal
to or greater than the number specified in the error message.
4
Click
OK.
Cannot read file filename.ext.
The Setup installation program presents this error message when it cannot
read a file on the OmniPage disk set. See “Setup Program Requests Same
Disk” on page 224.
Choose Open Document in the File menu to open Caere
Documents.
You tried to open a Caere Document with the
Load Image
command. Open
a Caere Document by choosing
Open Document...
in the File menu.
Error accessing the user dictionary. Try freeing up hard disk
space. Dictionary size is limited to 32K.
This error message can appear if you are low on disk space. Try freeing up
hard disk space. The message can also appear if you have moved
