manualshive.com logo in svg

Norstar StarTalk Mini, Installation Manual, Page: 65 / 372

Share
Download
Norstar StarTalk Mini Installation Manual Download Page 65

Section 4: Your Personal Mailbox

4   

4 .

Enter

<your Personal Mailbox password>

Note: Your password must be between four and eight digits long. A
password cannot start with zero (0).

5.

To end your password, press 

 or 

The display shows:

6.

To accept your password, press 

 or 

The display shows:

7.

At the tone, record your name.

Note: When you record your name, remember to speak clearly and at a
pace that is easy to understand. It is a good idea to include your
mailbox number in your Company Directory recording. For example,
“Marina 

 mailbox number 41 

To end your recording, press 

 or 

The display shows:

Note: To replay your 

 before accepting it, press 

or 

To re-record your recording, press 

 

or 

 Mini Reference Guide

Summary of Contents for StarTalk Mini





















































































































































































































































































































































































Reviews:

No comments