manualshive.com logo in svg

Norstar StarTalk Mini, Installation Manual, Page: 302 / 372

Share
Download
Norstar StarTalk Mini Installation Manual Download Page 302

Section 11: Sending a message to more than one mailbox

11    9

Changing the

Member mailbox numbers can be added to or deleted from an existing Group

 

 

List at any time. Mailboxes must be initialized before they can be added to a
Group List. To create a new Group List, refer 

to Adding a Group List, 

earlier

 

 in this section.

To change the members of an existing Group List:

2.

Enter

<the System Coordinator Mailbox and password combination>

3.

P r e s s  

The display shows:

4.

P r e s s  
The display shows:

5.

Press

 I ST

The display shows:

6.

P r e s s  
The display shows:

   

7.

Enter

<the Group List number you want to change>

The display shows:

8.

Press 

 until

the display shows:

 Mini  Set Up and Operation Guide

Summary of Contents for StarTalk Mini





















































































































































































































































































































































































Reviews:

No comments