manualshive.com logo in svg

Norstar StarTalk Mini, Installation Manual, Page: 366 / 372

Share
Download
Norstar StarTalk Mini Installation Manual Download Page 366

Glossary    7

Resetting passwords

A System Coordinator task that changes a mailbox password from its current
setting back to the 

 default setting 0000 (four zeros).

Resetting 

Returning the 

 voice module to its original default settings.

Special Mailboxes

The two mailboxes used by the System Coordinator and designated 
operator. The two Special Mailboxes are: System Coordinator and General
Delivery.

 Mini Programming Record

The 

 outline where 

 configuration and CCR Tree information is

written down.

System Coordinator

The person responsible for configuring, updating, and maintaining the 

Mini voice module.

System Coordinator Mailbox

One of the two Special Mailboxes used by the System Coordinator for sending
Broadcast Messages. This is the System Coordinator’s Personal Mailbox.

Tone dial telephone

A push button telephone that emits DTMF tones.

Transfer Point

A message that provides a single-digit option to access a mailbox or an
extension.

Voice prompts

The prerecorded voice instructions that-are played when accessing the different

 features and options. Voice prompt also enable a caller to proceed

along the call path of the CCR Tree.

 Mini Set Up and Operation Guide

Summary of Contents for StarTalk Mini





















































































































































































































































































































































































Reviews:

No comments