Norstar StarTalk Mini Page 330 Installation Manual Download

Page: 330 / 372

Appendix:

feature compatibility

A 5

Privacy (DR3)

Private Line

Release Button

Ringing Line Preference

Selective Call Forward

Service Modes

Template

Transfer Callback

Lines that DRT to

or that

is set to answer,

must be set for Privacy ON. This ensures that
sessions involve only one user and

The default for

lines is Privacy ON.

The Privacy feature is only available on

Modular

using Modular DR3,

DR5 or

software.

When private lines are assigned to a set programmed to ring,
CFNA to

is answered by the set’s Personal Mailbox. If

a private line is the only appearance on that set,
transfers calls through the intercom key.

Note: If the private line is not programmed to ring, CFNA is not

invoked.

Ends a

session

Ringing lines programmed to

sets are recognized by

Features such as CFNA and CFAC to

are

not recognized by non-ringing lines programmed to

sets.

Refer to the CFNA, CFAC and Answer Keys.

Refer to Do Not Disturb.

The Service Modes feature allows the

System

to be programmed to forward all incoming calls to
during specific time periods, such as lunch time or non-business
hours.

The Service Modes feature is only available on

Modular

using Modular DR3, DR4, DR5 or

software.

is compatible with all templates (Square, PBX,

and Hybrid).

Calls through the Automated Attendant that are transferred to a
set without CFNA are routed by Transfer Callback to
after the designated number of rings. The

Callback feature programmed to the lesser value takes

Mini Set Up and Operation Guide

Summary of Contents for StarTalk Mini





















































































































































































































































































































































































Search results

Summary of Contents for StarTalk Mini

Reviews:

Related manuals for StarTalk Mini

Brands by name

Popular brands

Norstar StarTalk Mini, Installation Manual

Search results

Summary of Contents for StarTalk Mini

Reviews:

Related manuals for StarTalk Mini

Brands by name

Popular brands