Norstar StarTalk Mini Installation Manual Download Page 349

Page: 349 / 372

E 6

Appendix:

error messages

Appears when the maximum number of
mailboxes is registered with

The total number of mailboxes is 24

including the System Coordinator and
General Delivery Mailboxes.

i 1

Appears when Message Notification is

not enabled. Message Notification is
assigned in the Class of Service.

message received by

a mailbox is sent by someone who does
not have a mailbox registered and

initialized with

These types of

messages cannot use the
Reply option.

Appears when trying to transfer a call
before establishing an active call.

Appears when all of the Paths on a Tree

are assigned. The maximum number of

Paths per Tree is 8.

Appears while the first message in a
mailbox is playing, and the command is
entered to play the previous message.

Appears when a user is not allowed

access to a feature or Feature Code, or
when a second user attempts to access

the Configuration, Operator Status, or

Date and Time Feature Codes.

Mini Set Up and Operation Guide

Summary of Contents for StarTalk Mini





















































































































































































































































































































































































Search results

Summary of Contents for StarTalk Mini

Reviews:

Norstar StarTalk Mini, Installation Manual, Page: 349 / 372

Search results

Summary of Contents for StarTalk Mini

Reviews: