manualshive.com logo in svg

Norstar StarTalk Mini, Installation Manual, Page: 348 / 372

Share
Download
Norstar StarTalk Mini Installation Manual Download Page 348

Appendix: 

 error messages

E    5

Appears when the message being

recorded has too many Forward(s) and

Appears when a recorded message is

Appears when entering a mailbox that is

not initialized. Initializing a mailbox
includes changing the default password.

Appears when a mailbox owner’s name

is not included in the Company Direc-

tory.

 

   

 

 

 

Appears when adding or changing a
mailbox owner’s name and the charac-
ters exceed the allowable limit of 16.

The maximum field length includes the
comma.

 

 

 

 

 

 

 

 

 

 

 

 

 

Appears when the Company Directory is

empty. Either 

 mailboxes have

not been initialized by the owners, or
there are no mailboxes registered with

Appears when the maximum number of

Group Lists have been assigned. The

maximum number of Group Lists is two.

Appears when a mailbox owner is not
found that is similar to the characters
entered when using the Company
Directory. Check the correct spelling of
the mailbox owner’s name.

 Mini Set 

 and 

 Guide

Summary of Contents for StarTalk Mini





















































































































































































































































































































































































Reviews:

No comments