manualshive.com logo in svg

Norstar StarTalk Mini, Installation Manual, Page: 355 / 372

Share
Download
Norstar StarTalk Mini Installation Manual Download Page 355

F 

 4

Appendix 

F: 

 samples and tips

setting Up

The Bridge Stone Company is an engineering firm that has a Compact 

Business Communication system. The 

 installer programmed both

 

 and 

 The installer programmed 

 to be the 

 Call

medium

Forward No Answer telephone for each extension, This means that any call not

answered by a user is then transferred to the user’s 

 mailbox.

sized .

company

Each mailbox owner has buttons programmed for 

 Leave Message

and Open Mailbox Feature Codes. This allows easy access to these frequently

used features.

Each employee has been assigned a mailbox number that is the same as their

 extension number. Each mailbox owner has initialized their mailbox,

and recorded and selected a personal greeting.

When the receptionist is not available, the Custom Call Routing application
allows incoming caller to route their own call along a call path.

For the purpose of this example, we are going to look at how 

 CCR

and 

 work together in call handling.

The central receptionist

Bridge Stone’s central receptionist handles all calls from Bridge Stone’s
published telephone number, except when she is busy and unable to answer
the telephone. When the receptionist is unable to answer the telephone within
four rings, 

 Automated Attendant answers the call. She has also been

appointed 

 designated operator. Whenever a caller presses 

 to

speak with 

 operator, the caller is transferred to the central 

ist.

Here is how Bridge Stone’s communication system works.

Bridge Stone’s public telephone number is 55.51234. All lines appear on the

central receptionist’s telephone. 

 is the Prime set for each of the six

lines. Norstar’s Delayed Ring Transfer (DRT) feature is used to forward
unanswered lines to the 

 Automated Attendant.

Note: Delayed Ring Transfer is a 

 system-wide call handling feature.

All lines on the 

 programmed DRT to Prime are forwarded after four

rings, In the 

 Configuration, this is accomplished by setting the Prime

set of the line to the 

 DN. The DRT to Prime is set to YES, and the

DRT Delay is set to four.

 Mini Set Up and Operation Guide

Summary of Contents for StarTalk Mini





















































































































































































































































































































































































Reviews:

No comments